Water bottling machine, water bottling production line, Water bottling machine,water bottling production line,  Water bottling machine,water bottling production line,

Water treatment equipment (Production capacity: 6tons/per hour) in water bottling production line

No	Commodities	Model	Qty
1	Raw water tank	HQL-3000L	1pc
2	Raw water pump	WB120/185	1pc
3	Multi-media filter	MGZ-06	1pc
4	Carbonic filter	HGZ-06	1pc
5	Precision filter	JL-300	1pc
6	Final tank	HQL-3000L	1pc
7	Final pump	WB120/110	1pc
8	Ozone sterilizer	SOZ-45B	1pc
9	Ultra filter	UF-60	1pc
10	Valves fittings pipes	control
11	Packing fee

Water bottling machine, water bottling production line, Water bottling machine,water bottling production line,  Water bottling machine,water bottling production line,

1. General notes of water bottling machine
The water purifying system includes the pretreatment section, the ultra-filtration (UF) section and the ozone sterilization section. The system is designed to produce up to 6.0m3/h of product bottled mineral water.
Generally speaking, the feed water sources of this project design should reach the standard of mineral water quality index of your country or the related Chinese standard.

2. Design data of water bottling machine

2.1 The UF device output up to 6.0m3 per hour.
2.2 The inlet water should up to 7.0 – 10.0m3 per hour.
2.3 The total system recovery rate: about 90%

3. Technical flowchart of water bottling machine

Feed tank→Feed pump→Multi-media filter→Active carbon filter→UF device
→Final tank→Final pump→to Filler
↑
ozone/water mixing equip.←O3 generator

4. Function description of each device of water bottling machine

①Multi-media filter
The removal of suspended and colloidal particles by media filtration is based on their deposition on the surface of filter grains, while the water flows through a bed of these grains (filter media).  The filter media in water treatment are sands, magnetite and hard coal.
During operation, influent water to be filtered enters at the top of the filter, percolates through the filter bed, and is drawn off through the collector system at the bottom.
②Active-carbon filter
The active carbon has a large surface area that it reach 1000 m2 per gram. So it has a huge adsorption capacity. When the influent water flow through the active carbon bed, the free residual chlorine, taste, color, odor are adsorbed on the surface of the grains.
③Ultra-filtration device
Ultra-filtration provides macro-molecular separation for particles in the 20 to 1,000 Angstrom range (up to 0.1 micron). All dissolved salts and smaller molecules pass through the membrane. Items rejected by the membrane include colloids, proteins, microbiological contaminants, and large organic molecules.
A cartridge filter with a pore size of less than 5 µm is the minimum pretreatment required for every UF device. It is a safety device to protect the membranes from suspended particles. So a set of cartridge filter which includes six PP filter elements is fixed before the ultra-filtration elements.
After a long time running of ultra-filtration membranes, the scaling layer develops. A cleaning-in-place (CIP) system facilitates the cleaning of the membranes. Cleaning-in-place is carried out with cleaning chemicals.
④Ozone generator
The ozone is one of the most powerful oxidizer known. It can kill all kinds of the bacteria in the water immediately. Ozone must be generated on site because Ozone is unstable and can’t be bottled and shipped. So an O3 generator must be fixed in the water purifying works.

Water bottling machine, water bottling production line, Water bottling machine,water bottling production line,  Water bottling machine,water bottling production line,
5. Brief Running Control Description
①The system is designed to be controlled in an automatic mode （by SIEMENS PLC） where a signal from the external permeate storage tank (final tank) level switch or feed tank level switch causes the system to start and stop. If the system is in the AUTO mode, the system will start and stop based on external level control. If the system is in the HAND mode, it will continue to operate regardless of the external level control signal. To manually stop the system, move the H-O-A switch to the OFF position.

②The multi-media filter and the active carbon filter are equipped with the  2850 series filter control valve (FLECK, made in U.S.A). The two filters can automatically execute the operation program and the regeneration program under the controller.

Water bottling machine, water bottling production line, Water bottling machine,water bottling production line,  Water bottling machine,water bottling production line,
Filling system ( Capacity is 6000 B/H for 500ml) of water bottling machine

Water bottling machine, water bottling production line, Water bottling machine,water bottling production line,  Water bottling machine,water bottling production line,
NOTE:
1. The payment: First pay 30% of total value of the contract, before delivery should pay 65% by T/T, the rest of the amount will be paid in one month after finishing testing of the whole line.
2. The price: the price is FOB tianjin China, the valid time is 2 month.
3. The delivery time: 2 months after receiving the down payment.
4. The setting and testing
We will send 2 or 3 people to test our machines, we will help you set all the machines, and train your engineers, it is about 20 days, you should pay the round tickets, the food and the hotel in your country, and pay 30dallars per day per person as pocket money.
5.The guarantee: one year. If the quality of all the machines that have some problem, we will repair it by free in one year.

Water bottling machine, water bottling production line, Water bottling machine,water bottling production line,  Water bottling machine,water bottling production line,
Technical flow chart and explanation for water bottling production

 place onto conveyor by hand→rinser, filler and capper
                                               ↓
 dater printer←label shrink←label insert by hand←light checker
↓
Case packer by hand

After saling water bottling machine, We will send one or two engineers to test the  water bottling machine until it running in normal state.