Home About Clima Machinery Inquiry Ad Service Marketing Service

Blown Film Machine
(Blown Film Machine,Blown Film Machine,Blown Film Machine,Blown Film Machine,Blown Film Machine,Blown Film Machine,Blown Film Machine,Blown Film Machine,Blown Film Machine,Blown Film Machine,Blown Film Machine,Blown Film Machine)

2003-08-01 10:50:08
blown film machine has wide applications.This blown film machine inherits all the merits of the all blown film machine, enhanced by new technology. Compared with other blown film machine, our blown film machine enjoys many advantages including: more reasonable structure, more compact appearance, smoother operating, higher efficiency and is easy to operate and maintain. blown film machine has wide adoptablity, is an ideal blown film machine for you to convert into production. blown film machine that you need is just what we can supply. We are one of the most famous blown film machine exporters in China. We have been supplying a whole set of blown film machine for overseas customers. We would like to provide maximun customer satisfaction at lowest possible cost and best after-sale service. If you need blown film machine, please feel free to contact us.  


Blown Film Machine has been widely used in plastic film industry,As a leading company of exporting Blown Film Machine,we supply many types of Co-extrusion Blown Film Machine with good performance and competitive price.we are rich in experiences of setting up complete set of blown flim machine for our customers.

                                    blown film machine







                                            blown film machine




Commercial offer for 3FM series blown film production line

1. 3FM-1300 with IBC 3-layer co-Extrusion blown film production line
price: usd88900  FOB China port

option:
1.heat exchager (two pieces): usd2200
2.twice huff device: usd5850
3.cooling water roller(pipe,3 pieces): usd1100
4.PLC control system: usd7700
Including temperature control, speed adjustement, extruder pressure display, process recorder, length recorder.
 5. rotate mixer: usd1650
6. PLC control rewinder: usd13900
delivery term: within 60 days after receipt payment

2. 3FM-1600 3-layer co-Extrusion blown film production line
price: usd81700  FOB China port

option:
1.heat exchager (two pieces): usd2200
2.twice huff device: usd6950
3.cooling water roller(pipe 3 pieces): usd1370
4.PLC control system: usd8400
Including temperature control, speed adjustement, extruder pressure display, process recorder, length recorder.
  5. rotate mixer: usd1650
6. PLC control rewinder: usd15730
delivery term: within 60 days after receipt payment

   







3FM-1300 with IBC 3 layer co-Extruder blown film production line

Main specification of the production line
1. specification of finished product:
(W X T): 1200 X (0.025-0.18)mm
2. thickness tolerance:  ≤(±7%)
3. neatness of rewinding edge: ±1.5mm
4. capacity: 160kg/h (max)
5. take-up speed: 50m/min
6. total power: 160kw


Main parameters of equipment
1. Ex-65 Extruder  1set
 
screw diameter:Φ65mm
screw L/D ratio:30:1
main motor: 37kw
speed adjuster: VVVF
heating section: 5 sections
cooling mode: wind cooling
heating power: 22kw
2. Ex-55 Extruder  2sets
screw diameter: Φ55mm
screw L/D ratio: 30:1
main motor: 30kw
speed adjuster: VVVF
heating zone: 3 sections
cooling method: wind cooling
heating power: 15kw

3. Materials of screw and barrel:38CrMoAlA
hardness of heat treatment: screw HV≥740, barrel HV≥900
depth of hardening:0.4-0.7mm
  brittleness grade: ≤2 grade
  barrel heater: cast aluminium
4. gear box
    gear material: 20CrMnTi
    heat treatment: cementite
    cooling mode of gear box: out-cycling oil cooling
5. die    3SM300  plus a set of 3SM180 model
die diameter:Ф300mm
die gap: 1.8mm
material: steel 45#
surface treatment of flow channel: hard chrome- plating  
heating section: 2
power: 10kw  
6. air- ring : two wind-mouth air-ring
7. Bubble-fixed equipment: calibrating-cage
       Bubble-fixed diameter: 300-800mm  Manual
       Up down position: adjustable by manual
8. haul-off:
  haul-off roller size: Ф160×1300mm
  motor: 1.5kw
  speed adjuster: VVF
  cycling motor: 2.2kw
  height of haul-off roller: 7000mm
  speed: 50m/min
9. rewinding mode:
double position frictional rolling.
rewinding motor: moment motor
speed: 50m/min
measurement: automatic
10. automatic vacuum material feeding machine: ZJ400 4sets.  Power: 1.5kw
11. photoelectrical deviation rectifying device: J9
  leading roller length: 1300mm
  voltage: 220v 50hz
  signal channel: analog signals control
  control mode: DC servo motor, VMOS drive
  response time: <0.01 sec
  deviation rectifying speed: 200m/min
  track mode: edge track
output: DC ±20V  5A
12. IBC system
input/output wind diameter: Ф50 mm
inner wind-ring diameter: Ф240 mm
input/output power: 2.2kw
wind adjustment: VVVF
bubble diameter inspection: automatic

13. screen exchanger
  heating section: 2
  heating power: 4kw
  drive mode: manual
  pressure display: digital

14. crona
  model: CW1003
  power supply: 220v
  frequency: 15khz
  process width: 1300mm

Characteristic

1. the production line adopts rotate haul off mode, which makes blown film level up, equality, and rewinding edge neatness.
2. the 3 layer co-extrusion die is designed with advanced spiral flow channel, which makes material flowing equally in it.
3. outer wind-ring is designed in two wind blows,which makes wind blows equally and high efficiency cooling.
4. inner and outer cooling mode makes production efficiency up to 30%. At the same time, makes the blown film cooling fast, more transparent, and stronger mechnical characteristic.

3FM-1600 3 Layer co-extrusion blown film production line

Main parameters of the film blowing line:
1. finished film width and thickness(WXT):1450×(0.025-0.18)mm
2. thickness-thinness:±7%
3. neatness of rolling end:±1.5mm
4. out put: 160Kg/h(max)
5. take-up speed  :50m/min
6. power required:160KW



specification of the production line

1. Ex-65 extruder( 1 set)
screw diameter:Φ 65mm
screw L/D ratio: 30:1
main motor: 37kw
speed adjuster: VVVF
heating zone: 5 sections
cooling method: wind cooling
heating power: 22kw
2. Ex-55 extruder( 2sets)
screw diameter: Φ55mm
screw L/D ratio: 30:1
main motor: 30kw
speed adjuster: VVVF
heating zone: 3 sections
cooling method: wind cooling
heating power: 15kw

3. Materials of screw and barrel:38CrMoAlA
hardness of heat treatment: screw HV≥740, barrel HV≥900
  depth of hardening:0.4-0.7mm
  brittleness grade: ≤2 grade
  barrel heater: cast aluminium
4. gear box
    gear material: 20CrMnTi
    heat treatment: cementite
   cooling method of gear box: out-cycling oil cooling
5. die(3SM350), plus a set of die 3SM180
die diameter:Ф350mm
die gap: 1.5mm
material: steel 45#
surface treatment of flow channel: hard chrome- plating coated  
  6. air- ring : two wind-blow air-ring
material: cast aluminium
input wind blow: 6
digital display: input wind pressure and temperature  
7. Bubble-fixed equipment: calibrating-cage
Diameter of bubble-fixed: 400-1000mm, manual
Up and down position: adjusted by manual
8. rotate haul-off:
   haul-off roller size: Ф160×1600mm
   motor: 1.5kw
   speed adjuster: VVVF
   rotate motor: 2.2kw
   height of haul-off roller: 9200mm
  haul speed: 50m/min
9.winding mode: double position frictional rolling. rewinding motor: moment motor
rewinding speed: 50m/min
measurement: automatic alarm for length
 10. automatic vacuum material feeding machine: ZJ400 4sets.  Power: 1.5kw
 11. photoelectrical deviation rectifying device: J9
    leading roller length: 1600mm
    voltage: 220v 50hz
    signal channel: analog signals control
    control mode: DC servo motor, VMOS drive
    response time: <0.01 sec
    deviation rectifying speed: 200m/min
    track mode: edge track
output: DC ±20V  5A
12. screen exchanger
    heating section: 2
    heating power: 4kw
    drive mode: manual
pressure display: digital
13. crona
    model: CW1006
    power supply: 220v
    frequency: 25khz
    process width: 1600mm



Characteristic

1. the production line adopts rotate haul off mode, which makes blown film level up, equality, and rewinding edge neatness.
2. the 3 layer co-extrusion die is designed with advanced spiral flow channel, which makes material flowing equally in it.
3. outer wind-ring is designed in two wind blows,which makes wind blows equally and high efficiency cooling.







After saling blown film machine, if necessary, We will send one or two engineers to set up and commissioning of the  blown film machine until it running in normal state. Druing the time your workers who will operate the blown film machine will be trained.
 
  Name: Leave Word:
  Phone Number:
  Fax Number:
  Email: 
  Company Name:
  Street Address:
 


Copyright© 2003 China Light Industry Machinery Association All rights reserved.
E-mail:wangweiji@clima.org.cn